Hinge is a common hardware accessory, and it is relatively easy to damage. How to install the hinge? Let's take a look at the hinge installation method.

　　How to install the hinge

　　1. Preparation tools

　　Before installation, prepare special installation tools, such as measuring tape / level for measuring, woodworking pencil for line drawing positioning, woodworking hole opener / pistol drill for hole drilling, and screwdriver for fixing.

　　2. Line drawing positioning

　　First, use a measuring plate or a carpentry pencil to mark the location (the drilling margin is generally 5 mm), and then use a pistol drill or carpentry hole puncher to make a 35 mm hinge cup installation hole on the door panel. .

　　3. Fixed hinge cup

　　Put the hinge sleeve into the hinge cup hole on the entrance plate and fix the hinge cup with self-tapping screws.

　　4. Fixed base

　　After the hinge is inserted into the cup hole of the door panel, the hinge is opened, and then the side panel is fitted and aligned, and the base is fixed with a self-tapping screw.

　　5. Debugging effect

　　The last step is to test the effect of opening and closing the cabinet door. The general hinge can be adjusted in six directions, aligned up and down, the two doors are about right and left, the best effect of the cabinet door debugging is best, and the gap after the door is installed is generally 2 mm.

The above describes how to install the hinge. Let's take a look at how to clean and maintain the hinge.

　　1. Keep dry and avoid hinges and other hardware in humid air.

　　2. Wipe gently with a soft dry cloth. Do not use chemical cleaners or acidic liquids. If black spots on the surface are difficult to remove, wipe with a little kerosene.

　　3. When it is found that the hinge is loose or the door panel is uneven, it should be tightened or adjusted immediately with tools.

　　4. When opening and closing the cabinet door, avoid excessive force to prevent the hinge from being violently impacted and damaging the plating layer.

　　5. Avoid pulling or pulling during transportation, damaging the hardware of the furniture connection.

　　6. Lubricant maintenance can be added regularly every 2-3 months to ensure smooth and silent pulley.

　　7. Avoid touching the hinge with seasonings such as salt, sugar, soy sauce, vinegar, etc. If you accidentally touch it, wipe it with a dry cloth immediately.

　　8. Should prevent heavy objects and sharp objects from hitting and scratching.

　　9. Try not to leave the cabinet door open for a long time.

　　The above is how to install the hinge and how to install the hinge. I hope it will help everyone.