Guangzhou Lichuan Hardware Enterprise Co.,Ltd
The current position:
HOME > Info center > News >
How to install the hinge

how to install the hinge

The hinge is a common hardware accessory, and it is also relatively easy to damage. How to install the hinge? Let's take a look at the hinge installation method.

  How to install the hinge

  1. Preparation tools

  Before installation, prepare special installation tools, such as measuring tape / level for measuring, carpentry pencil for line drawing positioning, carpentry hole opener / pistol drill for hole drilling, screwdriver for fixing, etc.

  2. Line drawing positioning

  First, use a measuring plate or a carpentry pencil to mark the position (the drilling margin is generally 5 mm), and then use a pistol drill or a woodworking hole punch to make a 35 mm hinge cup installation hole on the door panel. .

  3. Fixed hinge cup

  Insert the hinge sleeve into the hinge cup hole on the entrance plate and fix the hinge cup with self-tapping screws.

  4. Fixed base

  After inserting the hinge into the cup hole of the door panel, open the hinge, and then insert and align the side panel, and fix the base with self-tapping screws.

  5. Debugging effect

  The last step is to test the effect of opening and closing the cabinet door. The general hinge can be adjusted in six directions, aligned up and down, and the two doors are moderately left and right. The optimal effect of the cabinet door debugging is best. The clearance after installation is generally 2 mm.

The above describes how to install the hinge. Let's take a look at how to clean and maintain the hinge.

  1. Keep dry and avoid hinges and other hardware in humid air.

  2. Wipe gently with a soft dry cloth. Do not use chemical cleaners or acidic liquids. If you find black spots on the surface that are difficult to remove, you can wipe them with a little kerosene.

  3. When it is found that the hinge is loose or the door panel is uneven, it should be fastened or adjusted with tools immediately.

  4. When opening and closing the cabinet door, avoid excessive force to prevent the hinge from being violently impacted and damaging the plating layer.

  5. Avoid pulling or pulling during transportation, damaging the hardware of the furniture connection.

  6. Lubricating oil maintenance can be added regularly every 2-3 months to ensure smooth and silent pulley.

  7. Avoid touching the hinge with seasonings such as salt, sugar, soy sauce, vinegar, etc. If you accidentally touch it, wipe it with a dry cloth immediately.

  8. Should prevent heavy objects and sharp objects from hitting and scratching.

  9. Try not to leave the cabinet door open for a long time.


  The above is how to install the hinge and how to install the hinge. I hope to help everyone.

Contact Us

Tel:+86 020-86570012


Address:No.637,Yuecheng Commercial Building,No.1718,Jichang Road,Guangzhou,China