-
First fix our hinge to one side of our cabinet door. Pay attention to flush, there are generally reserved holes.
The installation of our cabinet doors is generally through the hinge link today's editor to analyze how to install our hinge according to the change. Simple and convenient
First fix our hinge to one side of our cabinet door. Pay attention to flush, there are generally reserved holes.
After that, we put our cabinet door upright on the top of our cabinet and jammed the reserved places with jammed paper on both sides.
Afterwards, nail our horizontally movable screw ports, one for each hinge.
Move our cabinet door to the central position of our cabinet by moving. Ensure convenient switching.
Then screw all our screw holes into our screws and tighten them. Then start adjusting.
We have two longitudinal screws for one hinge, and we can adjust our bottom to lengthen our hinge, so as to avoid knocking of our cabinet door and cabinet.
After adjusting our second screw, we can adjust the up and down deformation of our cabinet door. If it can't close, it means that this screw has not been adjusted. Finally adjust our cabinet door hinge and install it ~
Tel:+86 020-86570012
FAX:020-86373276
E-mail:gzlichuan@163.com
Address:No.637,Yuecheng Commercial Building,No.1718,Jichang Road,Guangzhou,China